Quote Originally Posted by jeroldharter View Post
I suspect that you might have some problems with this, so report back either way. I have never used hangers before so maybe I am wrong. I assume that if the film is held in place somewhat loosely on the 4 sides then it could pop out when inserted, agitated, or removed from the tray. If the film is held tightly by the frame, then it will probably bow and maybe pop out if not careful.
Turns out that the hangers hold the film securely but loosely without bowing.

The negs are also easily removed because of the clever spring-loaded gate that each compartment has.

I just tested it and the negs look good, no banding, no surge marks - good even developing.