I've been using WD2D+ for several months. Times are very close to those for PMK. With Bergger 200 sheet film (EI 100) my times are usually between 10 and 15 minutes when developing by inspection (12.5 minutes is my standard time with PMK). The stain is very green, and you can see a great deal of detail on the emulsion side of the negative under the green safelight. This developer will continue staining in the wash if you do not use an acid stop. With Classic Pan 400, developing time is around 25 minutes, but if you double the concentration of both A and B, you can get it down to 15 minutes.